695XL-PG
Built to provide the best combination of performance and portability for cutting in-ground utility pipe, the 695XL-PG Gas-Powered Utility Chain Saw with PowerGrit chain will change the way you cut pipe. The 695XL-PG offers an unmatched power to weight ratio, allowing you to cut up to 16” deep from one side into ductile iron, cast iron, PVC, HDPE, and Insituform lining. Also the 695XL-PG is capable of operating the full line of 16” ProFORCE concrete cutting chains, meaning you can use the saw on masonry, stone, and even reinforced concrete – perfect for pipe taps, utility vaults, bridge work, and other utility applications.
Feature & Benefits
- Longer chain life with Force4 Technology
- Ultimate versatility and power
- Also operates ProForce chain
- Highest horsepower for ductile iron
Part Number | Description |
575826 | ICS 695XL F4 Powerhead |
575827 | ICS 695XL-16 PG Gas Saw Package with 16” FORCE4 Guidebar and PowerGrit chain |
Technical Specifications
Weight | 21 lbs/9.6 kg (without bar and chain) |
Bar Length | Up to 16″ (40 cm) |
Engine Speed | 11500 +/- 500 rpm, 2500-2800 rpm idle |
Powerhead Dimensions | 19 inches (48 cm) Length 14 inches (36 cm) Height 12 inches (30 cm) Width |
Horsepower | 6.4 @9000 rpm |
Engine Type | 2-stroke, single cylinder, air cooled |
Displacement | 5.7 cu. inch (94 cc) |
Fuel Mix Ration | 50:1 (2%) fuel-to-oil |
Water Supply | Minimum of 20psi (1.5 bar) |
Gas Powered Chainsaw is available and ready to ship, same day, from Charlotte, NC.
Contact Us For Pricing and Additional ICS Products.
890-PG
If you’re looking for the highest level of performance and cutting capability, look no further. The 890PG Hydraulic-Powered Utility Chain Saw offers cutting depths up to 25” in ductile iron, cast iron, PVC, HDPE, and Instituform lining. The deep cutting ability of the 890PG with PowerGrit utility chain, allows the operator to make a single cut from one side meaning less excavation is required. The 890PG is also capable of operating the full-line of 890F4 ProFORCE concrete cutting chains, meaning you can use the saw on masonry, stone, and even reinforced concrete – perfect for pipe taps, utility vaults, bridge work, and other utility applications.
Feature & Benefits
- Also operates ProFORCE diamond chain
- Increased safety
- Better operator control
- Reduced excavation
- Versatility
Part Number | Description |
566123 | ICS 890PG-15 Saw Package 8 gpm, 15 inch Guidebar, PowerGrit chain, 1 ft hose whips, case |
566710 | ICS 890PG-15 Saw Package 8 gpm, 15 inch Guidebar, PowerGrit chain, 8 ft hose whips, case |
566125 | ICS 890PG-15 Saw Package 12 gpm, 15 inch Guidebar, PowerGrit chain, 1 ft hose whips, case |
566712 | ICS 890PG-15 Saw Package 12 gpm, 15 inch Guidebar, PowerGrit chain, 8 ft hose whips, case |
566124 | ICS 890PG-20 Saw Package 8 gpm, 20 inch Guidebar, PowerGrit chain, 1 ft hose whips, case |
566711 | ICS 890PG-20 Saw Package 8 gpm, 20 inch Guidebar, PowerGrit chain, 8 ft hose whips, case |
566126 | ICS 890PG-20 Saw Package 12 gpm, 20 inch Guidebar, PowerGrit chain, 1 ft hose whips, case |
566716 | ICS 890PG-20 Saw Package 12 gpm, 20 inch Guidebar, PowerGrit chain, 8 ft hose whips, case |
Technical Specifications
Weight | 27.3 lbs/12.4 kg with 15-inch (38 cm) bar and chain |
Bar Length | Up to 25″ (63 cm) |
Motor Speed | 8 GPM: 6100 rpm 12 GPM: 6500 rpm |
Powerhead Dimensions | 23 inches (58.5 cm) Length 10.5 inches (26.5 cm) Height 9.5 inches (24 cm) Width |
Torque | 8 GPM: 122 in-lbs (13.8 Nm) 12 GPM: 170 in-lbs (19.2 Nm) |
Horsepower | 8 GPM: 11.5 hp (8.5 kW) 12 GPM: 17.5 hp (13 kW) |
Hydraulic Supply | 8 GPM: (30 lpm), 2500 psi (172.5 bar) 12 GPM: (45 lpm), 2500 psi (172.5 bar) |
Noise Level | 107 dB @3 ft (1m) |
Water Supply | Minimum of 20psi (1.5 bar) |
Hydraulic Powered Chainsaw is available and ready to ship, same day, from Charlotte, NC.
Contact Us For Pricing and Additional ICS Products.
Part Number | Description |
562165 | Stihl GS 461 Compatible Drive Sprocket |
565065 | ICS Drive Sprocket – fits all 890F4-DD Saws |
565066 | ICS Drive Sprocket – fits all 890F4-FL Saws |
Drive Sprockets are available and ready to ship, same day, from Charlotte, NC.
Contact Us For Pricing and Additional ICS Products.
Feature & Benefits
- With the highest diamond concentration in the FORCE3 line, this chain is optimized for cutting harder materials, especially hard aggregate or heavily reinforced concrete.
- Laser-welded to patented chain chassis.
- Contains patented SealPRO® O-ring technology for longer life.
- 14 inch / 35 cm, 64 Drive Links.
- Fits Stihl GS 461 RockBoss®
Part Number | Description |
584302 | 14 inch |
ICS Force3 Premium Chain is available and ready to ship, same day, from Charlotte, NC.
Contact Us For Pricing and Additional ICS Products.
Feature & Benefits
- 14 inch Guidebar for the Stihl RockBoss®.
- Operates FORCE3 diamond chain.
Part Number | Description |
560807 | 14 inch |
Stihl Compatible Guidebar (Gas Powered) is available and ready to ship, same day, from Charlotte, NC.
Contact Us For Pricing and Additional ICS Products.
Feature & Benefits
- Utilized in public and private water and wastewater departments worldwide.
- Designed to cut a variety of materials from ductile iron to plastic pipe.
- Featuring brazed layer diamond coating on the FORCE4 platform.
- Safer, faster and easier cutting.
- Specifically designed to cut high-density polyethylene (HDPE)
Part Number | Description | Size |
607664 | PowerGrit XL | 16 inch |
537765 | PowerGrit | 20 inch |
ICS Ductile Iron Cutting PowerGrit Chains are available and ready to ship, same day, from Charlotte, NC.
Contact Us For Pricing and Additional ICS Products.
Feature & Benefits
- Strongest, most durable patented chain design
- Excellent in medium concrete with light reinforcement
- Rivet design means less stretch
- Contains Patented SealPro® O-ring technology for longer life.
- Available for hydraulic and gas-powered saws
Part Number | Description | Size |
531743 | ProFORCE-25 | 10/12 inch |
525342 | ProFORCE-29 | 15/16 inch |
525343 | FORCE4-29 PREMIUM L | 15/16 inch |
531749 | ProFORCE-34 | 20 inch |
525345 | ProFORCE-40 | 25 inch |
ICS Concrete Cutting ProForce Chains are available and ready to ship, same day, from Charlotte, NC.
Contact Us For Pricing and Additional ICS Products.
Feature & Benefits
- FORCE4 Guidebar for the ICS 890F4 hydraulic & 701-A pneumatic power cutters.
- Laser-cut internal water channels keep the nose sprocket lubricated.
- Deep groove stabilizes FORCE4’s chassis for straighter, cleaner cuts.
- Operates all FORCE4, CrossLINK & PowerGrit diamond chains.
- Available in 10-, 15-, 20-, and 25-inch cutting depths.
Part Number | Description | Size |
529829 | Force4 Guidebar | 10 inch |
523080 | Force4 Guidebar | 15/16 inch |
529767 | Force4 Guidebar | 20 inch |
525320 | Force4 Guidebar | 25 inch |
ICS Force4 Guidebars (Hydraulic & Pneumatic) are available and ready to ship, same day, from Charlotte, NC.
Contact Us For Pricing and Additional ICS Products.
Feature & Benefits
- FORCE4 Guidebar for the ICS 695XL F4 gas power cutter.
- Operates all FORCE4m CrossLINK & PowerGrit diamond chains.
Part Number | Description |
524490 | 16 inch |
ICS Force4 Guidebars (Gas Powered) are available and are ready to ship, same day, from Charlotte, NC.
Contact Us For Pricing and Additional ICS Products.