Cutter Diamond

diamond blades, concrete, asphalt, masonry, pavers, stone, core bits

  • About Us
    • Articles
    • Introduction Video
  • Products
    • Diamond Blades
      • Diamond Blades (4″-10″)
      • Diamond Blades (12″-20″)
      • Diamond Blades – Wet Cutting (18″-36″)
    • Surface Preparation
    • Diamond Core Bits
    • Equipment
    • Oregon Tool / ICS
  • Technical Info
    • Resource Guides
    • Aggregate Map
    • Troubleshooting
  • Contact Us

August 21, 2016 By

Hydraulic-Powered Utility Chain Saw

Hydraulic-Powered Utility Chain Saw

Hydraulic-Powered Utility Chain Saw main image
Hydraulic-Powered Utility Chain Saw-image

890-PG

If you’re looking for the highest level of performance and cutting capability, look no further. The 890PG Hydraulic-Powered Utility Chain Saw offers cutting depths up to 25” in ductile iron, cast iron, PVC, HDPE, and Instituform lining. The deep cutting ability of the 890PG with PowerGrit utility chain, allows the operator to make a single cut from one side meaning less excavation is required. The 890PG is also capable of operating the full-line of 890F4 ProFORCE concrete cutting chains, meaning you can use the saw on masonry, stone, and even reinforced concrete – perfect for pipe taps, utility vaults, bridge work, and other utility applications.

Feature & Benefits

  • Also operates ProFORCE diamond chain
  • Increased safety
  • Better operator control
  • Reduced excavation
  • Versatility
Part Number Description
566123 ICS 890PG-15 Saw Package 8 gpm, 15 inch Guidebar, PowerGrit chain, 1 ft hose whips, case
566710 ICS 890PG-15 Saw Package 8 gpm, 15 inch Guidebar, PowerGrit chain, 8 ft hose whips, case
566125 ICS 890PG-15 Saw Package 12 gpm, 15 inch Guidebar, PowerGrit chain, 1 ft hose whips, case
566712 ICS 890PG-15 Saw Package 12 gpm, 15 inch Guidebar, PowerGrit chain, 8 ft hose whips, case
566124 ICS 890PG-20 Saw Package 8 gpm, 20 inch Guidebar, PowerGrit chain, 1 ft hose whips, case
566711 ICS 890PG-20 Saw Package 8 gpm, 20 inch Guidebar, PowerGrit chain, 8 ft hose whips, case
566126 ICS 890PG-20 Saw Package 12 gpm, 20 inch Guidebar, PowerGrit chain, 1 ft hose whips, case
566716 ICS 890PG-20 Saw Package 12 gpm, 20 inch Guidebar, PowerGrit chain, 8 ft hose whips, case

Technical Specifications

Weight 27.3 lbs/12.4 kg with 15-inch (38 cm) bar and chain
Bar Length Up to 25″ (63 cm)
Motor Speed 8 GPM: 6100 rpm
12 GPM: 6500 rpm
Powerhead Dimensions 23 inches (58.5 cm) Length
10.5 inches (26.5 cm) Height
9.5 inches (24 cm) Width
Torque 8 GPM: 122 in-lbs (13.8 Nm)
12 GPM: 170 in-lbs (19.2 Nm)
Horsepower 8 GPM: 11.5 hp (8.5 kW)
12 GPM: 17.5 hp (13 kW)
Hydraulic Supply 8 GPM: (30 lpm), 2500 psi (172.5 bar)
12 GPM: (45 lpm), 2500 psi (172.5 bar)
Noise Level 107 dB @3 ft (1m)
Water Supply Minimum of 20psi (1.5 bar)

Hydraulic Powered Chainsaw is available and ready to ship, same day, from Charlotte, NC.

Contact Us For Pricing and Additional ICS Products. 

Most Oregon Tool / ICS Products are available and ready to ship same day from
Charlotte, NC.

Call for more information on
Oregon Tool / ICS Products.

 

We are located at:
4475-D Morris Park Drive
Charlotte, NC 28227

Call us at:
(980) 237-2839
Toll Free (866) 816-8073

Sales
orders@cutterdiamond.com

 

Copyright © 2023 · Cutter Diamond · 4475-D Morris Park Drive, Charlotte, NC 28227 · (980) 237-2839 · Toll Free (866) 816-8073