Feature & Benefits

• FORCE4 Guidebar for the ICS 695XL F4 gas power cutter.
• Operates all FORCE4m CrossLINK & PowerGrit diamond chains.

Part Number	Description
524490	16 inch

ICS Force4 Guidebars (Gas Powered) are available and are ready to ship, same day, from Charlotte, NC.

Contact Us For Pricing and Additional ICS Products. 

890-F4

If you’re looking for the highest level of performance and cutting capability, look no further. The 890PG Hydraulic-Powered Utility Chain Saw offers cutting depths up to 25” in ductile iron, cast iron, PVC, HDPE, and Instituform lining. The deep cutting ability of the 890PG with PowerGrit utility chain, allows the operator to make a single cut from one side meaning less excavation is required. The 890PG is also capable of operating the full-line of 890F4 ProFORCE concrete cutting chains, meaning you can use the saw on masonry, stone, and even reinforced concrete – perfect for pipe taps, utility vaults, bridge work, and other utility applications.

Feature & Benefits

• Also operates ProFORCE diamond chain
• Increased safety
• Better operator control
• Reduced excavation
• Versatility

Part Number	Description
566110	ICS 890F4 Hydraulic Powerhead 8 gpm, 1 ft hose whips
566112	ICS 890F4 Hydraulic Powerhead 12 gpm, 1 ft hose whips
566355	ICS 890F4 Hydraulic Powerhead 8 gpm, 8 ft hose whips
566116	ICS 890F4 Hydraulic Powerhead 12 gpm, 8 ft hose whips
566113	ICS 890F4 Hydraulic Flush Cut Powerhead 8 gpm, 1 ft hose whips
566114	ICS 890F4 Hydraulic Flush Cut Powerhead 12 gpm, 1 ft hose whips
566351	ICS 890F4 Hydraulic Flush Cut Powerhead 8 gpm, 8 ft hose whips
566117	ICS 890F4 Hydraulic Flush Cut Powerhead 12 gpm, 8 ft hose whips

Technical Specifications

Weight	27.3 lbs/12.4 kg
Bar Length	Up to 25″ (63 cm)
Motor Speed	8 GPM: 6100 rpm 12 GPM: 6500 rpm
Powerhead Dimensions	23 inches (58.5 cm) Length 10.5 inches (26.5 cm) Height 9.5 inches (24 cm) Width
Torque	8 GPM: 122 in-lbs (13.8 Nm) 12 GPM: 170 in-lbs (19.2 Nm)
Horsepower	8 GPM: 11.5 hp (8.5 kW) 12 GPM: 17.5 hp (13 kW)
Hydraulic Supply	8 GPM: (30 lpm), 2500 psi (172.5 bar) 12 GPM: (45 lpm), 2500 psi (172.5 bar)
Noise Level	107 dB @3 ft (1m)
Water Supply	Minimum of 20psi (1.5 bar)

Contact Us For Pricing and Additional ICS Products. 

695XL-PG

Built to provide the best combination of performance and portability for cutting in-ground utility pipe, the 695XL-PG Gas-Powered Utility Chain Saw with PowerGrit chain will change the way you cut pipe. The 695XL-PG offers an unmatched power to weight ratio, allowing you to cut up to 16” deep from one side into ductile iron, cast iron, PVC, HDPE, and Insituform lining. Also the 695XL-PG is capable of operating the full line of 16” ProFORCE concrete cutting chains, meaning you can use the saw on masonry, stone, and even reinforced concrete – perfect for pipe taps, utility vaults, bridge work, and other utility applications.

Feature & Benefits

• Longer chain life with Force4 Technology
• Ultimate versatility and power
• Also operates ProForce chain
• Highest horsepower for ductile iron

Part Number	Description
575826	ICS 695XL F4 Powerhead
575827	ICS 695XL-16 PG Gas Saw Package with 16” FORCE4 Guidebar and PowerGrit chain

Technical Specifications

Weight	21 lbs/9.6 kg (without bar and chain)
Bar Length	Up to 16″ (40 cm)
Engine Speed	11500 +/- 500 rpm, 2500-2800 rpm idle
Powerhead Dimensions	19 inches (48 cm) Length 14 inches (36 cm) Height 12 inches (30 cm) Width
Horsepower	6.4 @9000 rpm
Engine Type	2-stroke, single cylinder, air cooled
Displacement	5.7 cu. inch (94 cc)
Fuel Mix Ration	50:1 (2%) fuel-to-oil
Water Supply	Minimum of 20psi (1.5 bar)

Gas Powered Chainsaw is available and ready to ship, same day, from Charlotte, NC.

Contact Us For Pricing and Additional ICS Products.